Alloy: 2017
Temper:T4/T3
thickness: 0.3mm-4.0mm
width: 1000mm-2600mm
surface: mill finish or at request
standard: GB/T3880 、EN485、ASTM B209
Quantity: | |
---|---|
2017 aluminum sheet is the first alloy in 2xxx series to be applied in industrial application. It has high strength and good cutting performance, but its corrosion resistance is poor.
2017 aluminum plates are usually used in rivets, general mechanical parts, aircraft, ships, transportation, building structural parts, transportation structural parts, propeller components and accessories, etc.
SPECIFICATION
2017 T4/T3 aluminum alloy plate:
Regular thickness range: 0.3-4mm
Regular width range: 1000-2600mm
The following table shows the chemical composition of aluminium / aluminum 2017 alloy.
Chemical Composition
Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Standard |
0.2-0.8 | 0.7 | 3.5-4.5 | 0.4-1.0 | 0.4-0.8 | 0.1 | 0.25 | 0.15 | GB/T3190 ASTM B209 EN573 |
The physical properties of aluminium / aluminum 2017 alloy are outlined in the following table.
2017 T4/T3 aluminum alloy plate mechanical properties:
Temper | Thickness/mm | Rm(Mpa) Tensile Strength | Rp0.2(MPa)Yield Strength | A50% Breaking Elongation | Standard | |||
Standard | zhuxia performance | Standard | zhuxia performance | Standard | zhuxia performance | |||
T4 | 0.3-3.5 | ≥390 | 395-405 | ≥245 | 255-270 | ≥14 | 19-23 | GB/T3880 、EN485、ASTM B209 |
* Remarks: Specific requirement of alloy, temper or specification can be discussed at your request.
content is empty!