2A50 Casting Billet
Homogenization
Diameter Available: 166、220、380、396、448、462、566、582、915、1060、1220、1320 (mm)
Standard: GB/T3190
Quantity: | |
---|---|
2A50 aluminum alloy, a type of aluminum alloy. It has the characteristics of high plasticity, easy forging and stamping.
High-strength wrought aluminum has high plasticity in the hot state, easy to forge. Stamping; can be strengthened by heat treatment, the strength after quenching and artificial aging is similar to duralumin; the process performance is better, but there is extrusion effect, so it is longitudinal and transverse The performance is different; the corrosion resistance is good, but there is a tendency to intergranular corrosion; the cutting performance is good, resistance welding, spot welding, seam welding performance is good, arc welding and gas welding performance is not good. "
Specification
Alloy | Temper | Diameter (mm) | Feather crystals | Bright crystals | Porosity | Grain Size Level |
2A50 | Homogenization | 166、220、380、396、448、462、566、582、915、1060、1220、1320 | No | No | 1st Class | ≤3 |
Chemical Composition
Si | Fe | Cu | Mn | Mg | Cr | Zn | Zr | Ti | |
0.7-1.2 | 0.7 | 1.8-2.6 | 0.4-0.8 | 0.4-0.8 | / | 0.3 | / | / | 0.15 |
* Remarks: Specific requirement of alloy, temper or specification can be discussed at your request.
content is empty!