Alloy: 5083
Temper: O/H111/H112/H116/H321
Thickness: 4mm-260mm
Width: 1200mm-3800mm
Surface: raw finish or as request
Quantity: | |
---|---|
5083 O/H111/H112/H116/H321 Marine Aluminium Sheet & Plate for Ship Building
The 5083 aluminum alloy is a high-magnesium alloy with good strength, good corrosion resistance, and machinability in non-heat treatable alloys.
SPECIFICATION
5083 O/H111/H112/H116/H321 Marine Aluminium Sheet & Plate for Ship Building:
Regular thickness range: 3-260mm
Regular width range: 1200-3800mm
The following table shows the chemical composition of aluminium / aluminum 5083 alloy.
Chemical Composition
Si | Fe | Cu | Mn | Mg | Cr | Zn | Zr | Ti | Standard |
≤0.4 | ≤0.4 | ≤0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | ≤0.25 | - | ≤0.15 | GB/EN/ASTM |
The physical properties of aluminium / aluminum 5083 alloy are outlined in the following table.
5083 H116/H321 aluminum alloy plate Mechanical properties:
Temper | Thickness/mm | Rm(Mpa) Tensile Strength | Rp0.2(MPa) Yield Strength | A50% Breaking Elongation | Standard |
O/H111/H112 | 3-50 | 275-350 | 125-200 | ≥16 | GB/EN/ASTM |
H116 | 3-50 | ≥305 | ≥215 | ≥10 | GB/EN/ASTM |
H321 | 3-50 | 305-385 | 215-295 | ≥10 | GB/EN/ASTM |
Certification: ISO, OHSAS, GJB, CNAS, AS9100D, TS22163, TS16949, Nadcap, ABS, DNV, BV, CCS, LR, CPR.
* Remarks: Specific requirement of alloy, temper or specification can be discussed at your request.
content is empty!