5182 O/H111 Aluminium Coil
Thickness: 0.5mm-3.5mm
Width: as requested
Standard: EN/ASTM
Quantity: | |
---|---|
5182 belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, it is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and moderate strength. The main alloy element of 5052 is magnesium, which has good forming processability, corrosion resistance, weldability, and medium strength. It is used to manufacture aircraft fuel tanks, fuel pipes, and sheet metal parts for transportation vehicles and ships, instruments, street lamp brackets and rivets, Hardware products, electrical enclosures, etc.
Specification
Alloy | Temper | Thickness(mm) | Width(mm) |
5182 | O/H111 | 0.5-3.5 | 1200-2650 |
The physical properties of aluminium / aluminum 5182 alloy are outlined in the following table.
Mechanical Properties
Temper | Rm(Mpa) Tensile Strength | Rp0.2(MPa) Yield Strength | A80(%) Elongation at Break | Ag(%) Uniform Elongation | r Plastic Strain Ratio | n Strain Hardening Exponent | Rp/Rm Yield Tensile ratio |
O/H111 | ≥270 | 120-160 | ≥23 | ≥20 | ≥0.6 | ≥0.26 | ≤0.6 |
The following table shows the chemical composition of aluminium / aluminum 5182 alloy.
Chemical Composition
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Standard |
5182 | 0.2 | 0.35 | 0.15 | 0.2-0.5 | 4.0-5.0 | 0.10 | 0.25 | 0.1 |
|
* Remarks: Specific requirement of alloy, temper or specification can be discussed at your request.
content is empty!