Alloy: 6061
Temper: T6/T4
Diameter: 40mm-350mm
Standard: GB/T 3190
Quantity: | |
---|---|
6061 aluminum alloy is a high-quality aluminum alloy product produced by heat treatment and pre-stretching process. Although its strength cannot be compared with 2XXX series or 7XXX series, its magnesium and silicon alloy characteristics are many, and it has excellent processing performance and excellent welding characteristics. And electroplating, good corrosion resistance, high toughness and no deformation after processing, compact material without defects and easy to polish, easy to color film, excellent oxidation effect and other excellent characteristics.
SPECIFICATION
6061 T6/T4 aluminum alloy extruded bar:
Diameter: 40-350mm
The following table shows the chemical composition of aluminium / aluminum 6061 alloy.
Chemical Composition
Si | Fe | Cu | Mn | Mg | Cr | Zn | Zr | Ti | |
0.4-0.8 | 0.7 | 0.14-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | / | / | 0.15 |
The physical properties of aluminium / aluminum 6061 alloy are outlined in the following table.
6061 T6/T4 aluminum alloy extruded bars mechanical properties:
Alloy | Temper | (mm) Corse Grain Zone Depth | (mm) Diameter | Rm(Mpa) Tensile Strength | Rp0.2(MPa) Yield Strength | (%) Elongation | Standard |
≥ | |||||||
6061 | T6 | ≤5 | ≤150 | 260 | 240 | 9 | GB/T 3910 |
6061 | T4 | ≤5 | ≤150 | 180 | 110 | 14 |
* Remarks: Specific requirement of alloy, temper or specification can be discussed at your request.
content is empty!