Alloy: 7075
Temper: T6
Thickness: 0.5mm-4.0mm available
Width: 1000mm-2600mm standard
Surface: mill finish
Quantity: | |
---|---|
7075 aluminum sheets is a cold-treated forged alloy with high strength, far superior to mild steel. 7075 is one of the strongest commercial alloys. 7075 aluminum alloy has a compact structure and strong corrosion resistance, and is the best aluminum sheet for aerospace and aviation and marine. 7075 aluminum sheets are of general corrosion resistance, good mechanical properties and anode reaction. The fine grain of 7075 aluminum makes the deep drilling performance better and the tool wear resistance increased. 7075 aluminum corresponds to the new national standard 7A09 and the old LC9.
T6 temper means Artificial aging state after solution treatment.
SPECIFICATION
Chemical Composition
Si | Fe | Cu | Mn | Mg | Cr | Zn | Ni | Ti | Standard |
0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | - | 0.2 | GB/T 3190 EN573 ASTM B209 |
7075 t6 aluminum sheets:
Regular thickness range: 0.5mm-4.0mm
Regular Width range: 1000mm-2600mm
Rm(Mpa) Tensile Strength | Rp0.2(MPa)Yield Strength | A50% Breaking Elongation | Standards | |||
Standard | zhuxia performance | Standard | zhuxia performance | Standard | zhuxia performance | GB/T3880 EN485 ASTM B209 |
≥540 | 550-570 | ≥460 | 480-500 | ≥6 | 11-15 |
content is empty!