Alloy: 7150
Temper: T7751
Thickness: 4mm-260mm
Width: 1200mm-3800mm
Surface: mill finish or at request
Standard: AMS4252A
Quantity: | |
---|---|
7150 aluminum alloy is one of the new aluminum alloy materials developed in China and belongs to the Al-Zn-Mg-Cu series aluminum alloy. Aluminium / aluminum 7150 alloy is chiefly used in high strength applications such as aircraft components manufacturing.
When the 7150 T7751 aluminum alloy has a suitable texture of coarse and long recrystallized grains and a fine equiaxed grain structure, it can obtain higher strength in the direction of the coarse grain length.
SPECIFICATION
7150 T7751 aluminum alloy plate:
Regular thickness range: 4-260mm
Regular width range: 1200-3800mm
The following table shows the chemical composition of aluminium / aluminum 7150 alloy.
Chemical Composition
Si | Fe | Cu | Mn | Mg | Cr | Zn | Zr | Ti | Standard |
0.12 | 0.15 | 1.9-2.5 | 0.1 | 2.0-2.7 | 0.04 | 5.9-6.9 | 0.08-0.15 | 0.06 | GB AMS EN |
The physical properties of aluminium / aluminum 7150 alloy are outlined in the following table.
7150 T7751 aluminum alloy plate mechanical properties:
Temper | Direction | Thickness/mm | Rm(Mpa) Tensile Strength | Rp0.2(MPa)Yield Strength | A50% Breaking Elongation | Standard | |||
Standard | zhuxia performance | Standard | zhuxia performance | Standard | zhuxia performance | ||||
T7751 | LT | 6-100 | ≥517 | 585-590 | ≥565 | 550-555 | ≥6 | 10-12.5 | AMS4252A |
* Remarks: Specific requirement of alloy, temper or specification can be discussed at your request.
content is empty!