+86-18820808108           alnan.aluminium@outlook.com
Share to:

7A09 T62 aluminum alloy plate

Alloy: 7A09
Temper: T62
Thickness: 4mm-260mm
Width: 1200mm-3800mm
Surface: Mill finish or at request

Quantity:

7A09 aluminum plate main features and application scope:

7A09 aluminum alloy belongs to Al-Zn-Mg-Cu series super-durable aluminum. This alloy is an ultra-high-strength deformed aluminum alloy that has been used in the aircraft industry in the late 1940s and is still widely used in the aviation industry.

7A09 aluminum sheet is characterized by good plasticity after solution treatment, particularly good heat treatment strengthening effect, high strength below 150℃, and particularly good low temperature strength; poor welding performance; tendency to stress corrosion cracking; need to be coated with aluminum or other Protective use. Two-stage aging can improve the alloy's ability to resist stress corrosion cracking. The plasticity in the annealed and just-quenched state is slightly lower than that of 2A12 in the same state. It is slightly better than 7A04 aluminum alloy, the static fatigue of the plate. The notch is sensitive, the response force corrosion performance is better than 7A04 aluminum alloy.


SPECIFICATION


7A09 T62 aluminum plate:

Regular thickness range:  4-260mm

Regular width range:  1200-3800mm


The following table shows the chemical composition of aluminium / aluminum 7A09 alloy.

Chemical Composition

Si

Fe

Cu

Mn

Mg

Cr

Zn

Zr

Ti

Standard

0.5

0.5

1.2-2.0

0.15

2.0-3.0

0.16-0.3

5.1-6.1

-

0.1

GB

AMS

EN


The physical properties of aluminium / aluminum 7A09 alloy are outlined in the following table.

7A09 T62 aluminum alloy plate Mechanical properties:

TemperDirectionThickness/mmRm(Mpa) Tensile Strength
Rp0.2(MPa)Yield StrengthA50% Breaking ElongationStandard
Standardzhuxia performanceStandardzhuxia performanceStandardzhuxia performance
T62LT6-80≥490550-570≥410495-500≥314.5-17.5GJB2662A


* Remarks: Specific requirement of alloy, temper or specification can be discussed at your request.



Related News

content is empty!

Products

Quick Links

Contact Us
  +86-028-87585792
   Joshua Ning
   +86-18820808108
  alnan.aluminium@outlook.com
Get In Touch

Contact us
© 2020 ZhuXia Metal Products Co., Ltd. All rights reserved. 
Technology by leadong