Raw Material:
Use Zigong YG10X, high hardness and good wear resistance and corrosion resistance.
Flutes:
3 flutes, effectively mitigate vibration and stable cutting.
A Type:
Double-edge design provides good smooth finish and is suitable for semi-finish and finish machining.
B Type:
Single-edge design, sharp blade, good for chip removal, high cutting speed, widly used in rough machining.
Quantity: | |
---|---|
Raw Material:
Use Zigong YG10X, high hardness and good wear resistance and corrosion resistance.
Flutes:
3 flutes, effectively mitigate vibration and stable cutting.
A Type:
Double-edge design provides good smooth finish and is suitable for semi-finish and finish machining.
B Type:
Single-edge design, sharp blade, good for chip removal, high cutting speed, widly used in rough machining.
Tolerance of End Mill Diameter:
1 < D ≤ 6 | -0.010 ~ -0.030 |
6 < D ≤ 10 | -0.015 ~ -0.040 |
10 < D ≤ 20 | -0.020 ~ -0.050 |
Cutting parameters:
Cutting speed Vc = 220 (100-800) m / min
Cut depth ap = 1/2D (1 / 8-3/4D)
Cut width ae=1/2D (1 / 4-1D)
Single blade feed fz = 0.15mm (0.02-0.2)
Please adjust the parameters accroding to the material and hardness of workpieces.
content is empty!