Raw Material:
Use Zigong YG10X, high hardness and good wear resistance.
Coating:
AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.
Flutes:
4 flutes, high rigidity, widely used in shallow slot, profile milling, and finish machining.
Quantity: | |
---|---|
Raw Material:
Use Zigong YG10X, high hardness and good wear resistance.
Coating:
AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.
Flutes:
4 flutes, high rigidity, widely used in shallow slot, profile milling, and finish machining.
Helix Angle:
35 deg, high adaptability to the material and hardness of workpieces, widely used to mold and product processing and cost efficient.
Tolerance of End Mill Diameter:
1 < D ≤ 6 | -0.010 ~ -0.030 |
6 < D ≤ 10 | -0.015 ~ -0.040 |
10 < D ≤ 20 | -0.020 ~ -0.050 |
Cutting parameters:
Cutting speed Vc = 220 (120-180) m / min
Cut depth ap = 1/3D (1 / 8-1/2D)
Cut width ae=1/2D (1 / 4-1D)
Single blade feed fz = 0.15mm (0.02-0.2)
Please adjust the parameters accroding to the material and hardness of workpieces.
content is empty!