- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
Raw Material：
Use Zigong ZK30UF, high hardness and good wear resistance.
Coating：
TiSiN, containing silica, very high surface hardness and high thermal resistance.
Cutting Edge Design：
Comer radius, uneasy to cracking, widly used in high speed cutting
| Quantity: | |
|---|---|
Raw Material：
Use Zigong ZK30UF, high hardness and good wear resistance.
Coating：
TiSiN, containing silica, very high surface hardness and high thermal resistance.
Cutting Edge Design：
Comer radius, uneasy to cracking, widly used in high speed cutting
Helix Angle：
35 deg, high adaptability to the material and hardness of workpieces, widely used to mold and product processing and cost efficient.
Tolerance of End Mill Diameter:
1 < D ≤ 6 | -0.010 ~ -0.030 |
6 < D ≤ 10 | -0.015 ~ -0.040 |
10 < D ≤ 20 | -0.020 ~ -0.050 |
Cutting parameters:
Cutting speed Vc = 130 (120-180) m / min
Cut depth ap = 1/3D (1 / 8-1 / 2D)
Cut width ae=1/2D (1 / 4-1D)
Single blade feed fz = 0.15mm (0.02-0.2)
Please adjust the parameters accroding to the material and hardness of workpieces.
